Future-proof your townships before the slab is poured. Solar-ready conduit + EV-ready 32A circuit at RM30–150/door — 10× cheaper than retrofit.
Every month of delay moves the intervention from a line-item in your M&E BQ to a costly, disruptive site operation — or worse, a JMB liability.
Malaysia's ATAP programme and RE Roadmap mandate rapid residential solar adoption. Buyers will demand it — your spec should be ready now.
Post-handover conduit runs damage ceilings, walls, and finishes. Pre-construction specification eliminates this entirely at a fraction of the cost.
Without dedicated 32A circuits from day one, strata and landed JMBs will face six-figure infrastructure bills when EV penetration hits critical mass.
TCFD and CSRD-aligned reporting increasingly captures end-user emissions. Solar-ready spec is a demonstrable Scope 3 mitigation that belongs in your ESG disclosure.
Four integrated deliverables that your M&E consultant can incorporate directly into the construction drawing package.
Per house-type drawings: 25mm conduit from distribution board to roof eaves, pre-marked meter pocket sized for string or micro-inverter, UV-rated pull-string pre-installed.
Dedicated 32A MCB slot in DB, minimum 6mm² cable run to carport/basement, load management relay pre-wired. Compliant with TNB Technical Guidelines (TG-4) and JKR EV guidelines.
Panel zone marking on structural drawings, anchor point embedment specification, thermal-break compliance review. No future penetration surprises.
Smart sub-meter conduit routed to comms room or DB. Plug-and-play for Trexon or third-party monitoring on handover day.
We embed into your existing design and construction workflow — no parallel process, no site disruption.
We engage your architect and M&E consultant during Design Development or Schematic Design. No rework — we fit within your standard drawing set.
We issue PE-stamped solar-ready and EV-ready drawings, bill of materials, and a compliance checklist. Sufficient for submission to JKR, MBPJ, or any local authority.
Reinforcement inspection, conduit roughing check, and pre-plaster confirmation. We sign off before each pour so defects are caught before they are buried.
Every buyer receives a solar-ready passport: conduit routes, DB label, anchor coordinates, and a QR-linked Trexon quote for system installation. Marketing asset included.
Minimum engagement: 500 doors. Typical project: 500–2,000 doors = RM50K–RM300K contract value. Volume discounts available above 2,000 doors.
Solar-ready only
Solar + EV-ready
Full solar-ready package
We have completed engagements with landed township developers, high-rise condominium principals, and mixed-use master-planned communities across Selangor, Johor, and Penang. Pilot projects welcome.
We offer a free 60-minute technical briefing for your project team. Bring your indicative site plan — we'll show you exactly what a solar-ready specification adds to your M&E package and ESG disclosure.